PHONE
06 876 4758
FREEPHONE 0800 331 372
FAX 06 878 8970
528 Omahu Rd, Hastings. |
|
Previous
Page -|-
Next Page -
| -download
a printer friendly A4 PDF -|-
larger view
WECO Discovery 251MF
| WECO Discovery 150E | WECO Discovery
150T | WECO Discovery 170E | WECO
Discovery 170T
WECO Discovery 170T-MAX | WECO Discovery
200 AC/DC & 201T | Awelco Euro Arc 140 | Inverter
Features
return to top of page
return to top of page
return
to top of page
return
to top of page
return to top of page
return to top of page
return
to top of page
return
to top of page
- HOT START:
Managed by the microprocessor in WECO inverters according to the welding
current, hot start consists of a rise in the initial current to allow
for better striking of the electrode.
- ARC FORCE:
Regulated by the microprocessor according to the welding current, arc
force entails a rise in current to facilitate detachment of droplet
transfer.
- ANTI STICK:
The WECO anti stick function causes the welding current to be blocking
in the event that the electrode should stick to the piece.
TIG
- LIFT ARC:
All “E” Series inverters (and as an option in the “T”
Series inverters) use touch- and- lift tungsten start. This function
is available in both 2- stroke and 4- stroke in the “T”
Series.
- HIGH FREQUENCY:
High frequency start is available in the “T” Series inverters.
(Lift Arc remains as an option). This function is available in both
2-stroke and 4- stroke in the “T” Series.
- PULSE:
Pulse allows the current to be pulsed between values of amps selected,
mitigated by determined or selected frequency (Hz). WECO inverters have
pulse available in all models of TIG inverters.
- In the “E”
Series the pulse has the frequency and current settings factory set
according to the welding current.
- In the “T”
Series the pulse can be varied in terms of base current, peak time,
base time and frequency (5- 250 Hz).
- SLOPE UP/
DOWN: Available for all WECO “T” Series machines
the slope function allows the machine to increase or decrease current
to a operator selected time.
- PRE-AND
POST-GAS: Available for all WECO “T” Series machines
the pre-and post-gas is adjustable.
Previous
Page -|-
Next Page -
| -download
a printer friendly A4 PDF -|-
larger view |
return to top of page
|